• Registered: 2009-09-10
  • Posts: 1

Topic: 3 green, 1 orange light.

well i finaly got my nabaztag 1st gen to find and connect to my network after changing it from wpa to wep. Now i get the 3 green middle lights but the nose light is still flashing orange.
i have made sure that DHCP is set to yes (i have even tryed setting it to no and entering the info).
I am stuck for ideas not i have tried everything! aah!

  • Registered: 2009-10-20
  • Posts: 2

Re: 3 green, 1 orange light.

Welcome to my world dude, have you had any answers yet? it appears most are from a few years ago. i also have first gen, was working fine now im having the orange light problem. go to config mode and http://192.168.0.1/a.htm

can you see any advanced options for changing server? as most of the answers say to do this im a little stumped as i cant see it!

  • Registered: 2009-10-20
  • Posts: 2

Re: 3 green, 1 orange light.

Solved it! follow these intructions exactly!!


- Put your bunny in "all blue" mode (press his button while plugging him in
and when his lights are blue let go of the button)
- Go to the nabaztagXX network in your list of wireless networks to connect
directly to your bunny
- Wait about 20 seconds then go to the configuration page at
http://192.168.0.1 in your web browser
- Now change the URL to http://192.168.0.1/b.htm?a=62.210.186.164&b=80 and
press Enter
- On the following page, click ‘Continue’
- Check and make sure that the ’Violet platform’ is in fact 62.210.186.164:80
- Press ‘Update and Start’ at the bottom of the page and your bunny should
connect again automatically.

  • Registered: 2006-12-23
  • Posts: 8

Re: 3 green, 1 orange light.

This fix doesn't work for me.  The silly rabbit keeps trying a few times but it ends up with three green bottom lights and a flashing orange nose light.  After a few attempts it just goes to all four lights flashing orange.