• Registered: 2009-05-20
  • Posts: 2

Topic: lights not turning blue for initial setup

Hello everyone,

I just got this cute bunny handed over by my girlfriend (she got bored of it  while ago) but I am quite excited about having it.

This is an old style one with the pwer socket at the back (not under like the photos on the website)I am trying to do the initial setup, I hold the button between the ears, plug it in and all lights flash purple making a noise, the lights never turn blue and eventually turn red flash a couple of times. I tried several times but never got the lights to turn blue, can anyone help!??

Thanks!

  • Registered: 2009-04-24
  • Posts: 23

Re: lights not turning blue for initial setup

Hello Emilio,

Be sure to maintain the pression on the button while you plug your rabbit.

The procedure is as follows :
- unplug the power socket of your rabbit
- press the button and keep it pressed
- plug the socket (still pressing the button)
- keep the button pressed until the blue lights come up
- release the button

Let All Things Be Connected
www.violet.net
Follow us on twitter : www.twitter.com/violetOS

violet's Website

  • Registered: 2009-05-20
  • Posts: 2

Re: lights not turning blue for initial setup

Hi Violet,

I had followed that procedure but it didn't work, but I tried again and it worked!!! :-) Blue light are now flashing,... which is great but issue now is that I cannot see the wireless nazbatag network. I have tried with 2 complters but it does not show in either. I can see many other networks in the area including my own.

Any suggestions?

Many thanks,
Emilio.